Audio from USB can be monitored without the direct feed from the microphone. Note: The Ammoon AGM04 appears to be a re-branded ART USBMix4.ĪRT USBMIX4, USB 4-channel compact mixing console ( see above), lower retail price than the AGM04 in Canada and includes CD-ROM with ART ASIO driver plus 5 VDC power adapter for standalone use or when computer USB port cannot supply suffciient juice. There is no way to monitor only the USB return signal on the AGM02. On Windows 10, with ASIO4ALL, the AGM02 can be used as an input, and the onboard audio as the output. Audio interfaces / digital mixing consolesĪmmoon AGM02 and Ammoon AGM04, low-cost USB 2-channel and 4-channel compact mixing consoles When selected for input and output in Jamulus, the UGC102 headphone jack is the output (and cannot be used for input). This device appears as “USB Audio Codec”. Linux: ✅ Tested with a Raspberry Pi 4 under Raspberry Pi OS Buster, kernel version 4.19.īehringer UGC102, Guitar-to-USB Interface (guitar and bass) Set the PC/Mix dialog box to 100% PC to listen to Jamulus’ mix on the headphone output. Shure X2u, USB to XLR audio interface with headphone jack connector that converts a wired microphone to a USB microphone. Probably a bit more latency than under macOS. Marantz MPM-1000U, low-cost USB Microphone You can’t disable local monitoring (or we haven’t found out how to do it, feel free to add this information if you know how to do it). (There is a check option to disable local monitoring). You can disable local monitoring by going deep into the settings. Windows: ✅ Works well with ASIO4ALL a bit more latency than under macOS. If you own this device and test it, feel free to the results here. ❌ - Will not work correctly, or does not allow you to turn monitoring off so will cause problems. If you want to buy a new device, don’t buy this one. □ - Works, but there might be some difficulties. You might need to set up some things, but sound quality and latency are fine. ✅ Works reasonably well with Jamulus and lets you turn monitoring off (if applicable). On Windows, it’s recommended to choose a device with a native ASIO driver - not ASIO4ALL (or other generic ASIO drivers). This may or may not be significant depending on the instrument you play. NOTE the device must have a sample rate of 48 kHz (DVD quality) - which many devices do.Īdditionally, it should allow you to listen to the computer’s audio signal. Please indicate the platform(s) you are using. Just edit this page and wait for an approval. Most are quite inexpensive and are “plug and play”. These usually perform much better than “stock” hardware in terms of audio quality, latency and time needed to set them up. However, most people use external devices like USB microphones or audio interfaces. You can of course use Jamulus with your computer’s built-in sound card or microphone. Enabling JavaScript may give you additional functionality on this site. This site has been designed to provide basic functionality without JS.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |